HAPPYMODEL Nano 2 NTSC FPV Camera with VTX 2.1mm FOV 155¡ã 700TVL Nano2 Camera SH1.0 3pin for Larva X Mobula 7 HD FPV Racing Drone (with Whoop_VTX)

Nano 2 700TVL NTSC Camera
Image Sensor: 1/3″ CMOS
Image: 4:3
Lens: 2.1mm(M8) FOV 155¡ã
S/N Ratio: >50dB
Electronic Shutter Speed and Auto Gain Control (AGC): Auto
Min. Illumination: 0.01Lux@1.2F
D-WDR: Auto
Day/Night: Color
Power: DC 3-5.5V
Current : 110mA@5V 120mA@3.3V
Housing Material: ABS
Customized for Larva X with SH1.0 3pin

Diamond 5.8G 5bands 40ch 25mw-200mw Switchable VTX with DVR
Input voltage: 3.3V 5.5V
Current consumption: 250mA~510mA(type)
Antenna: RG178 antenna
U.FL interface
With Raceband
Smartaudio ready
Video Output Size: VGA (640×480)
Video Output format: NTSC
Record video size : 1280×720 @25FPS
TF Card support: Max.32G
Interface: JST SH1.0 3pin for Camera; JST SH1.0 5pin for Connect with F3/F4 Flight controller
Compress Format: AVI
Features:
Short touch the button to Start/Stop Video recorder
The video will split to 2 minutes automatically
Small size , lighter only 3gram and easy to mount in a regular whoop
Built-in DVR(Video size 1280×720)
Auto start when power on
Note: Auto-save when Power off is not support, please remember to press the stop button after landing

Whoop 5.8g 5bands 40ch 25mw~200mw switchable VTX
Small size ,lighter and easy to mount in a regular whoop
Input voltage: 3.3V 5.5V
Current consumption: 300mA(type)
Antenna: RG178 antenna U.FL interface
With Raceband
Smartaudio ready